CANtieCAR - J2534 HW - Diagcode edition
J2534 hardware specially developed for the needs of our company - Diagcode Ltd.
- Powerful CortexM4-core MCU - Wi-Fi chipset ESP8266EX - Bluetooth v2.0 + EDR + BLE - True USB-ready device: CDC, FT232B/R-emulation, FT2232C-emulation, MSD over SD Card - SD Card: internal Flash storage with USB-MSD up to 32GB - 3 independent ISO9141/ISO14239 K-Lines (ISO-Lines): OBDII-pins 7,8,15 - 2 multi-functional lines (MFLs): CAN - one and two-wires, K Lines, J1850, DC-DC-out (5-30V)/1W etc. - 3 CAN channels at the same time: Dual Wire CAN, Fault-tolerant CAN, Single wire CAN - SAE J1850 Normal and High Speed support: J1850PWM 41.6 Kbps and 83.3 Kbps; J1850VPW 10.4 Kbps and 41.6 Kbps - built-in analog switches multiplexer for OBDII-pins 1,2,3,6,8,13 and 8,9,10,11,12,14 with cross-link for the MFLs - built-in hardware UART multiplexer - built-in switchable CAN-bus differential terminator 120 Ohm - 9 Leds: 6 - Bus Activity, 1 bi-color - USB/Bluetooth/Wi-Fi TX Activity + Status, 1 bi-color - Power state: USB and car + USB Activity, 1 bi-color - Bluetooth/Wi-Fi Status/Activity - 2 DC-DC: 5V/500mA and programmable (5-35V)/1W - 8 ADC Channels: Power ISO-Lines, Power MFL, High MFL, Low MFL, OBD:1, OBD:8, OBD:9, OBD:16 - Systems: Up to 35V - Speed: ISO-Lines up to 1Mbit/s; CAN up to 1Mbit/s - Special OBDII-connector design - Security Firmware updates - ALL protections with Resetable fuses
- J1850VPW, J1850VPW_PS - J1850PWM, J1850PWM_PS - ISO9141, ISO9141_PS - ISO14230, ISO14230_PS - CAN, CAN_PS - ISO15765, ISO15765_PS - SW_CAN_PS, SW_ISO15765_PS - FT_CAN_PS, FT_ISO15765_PS - UART_ECHO_BYTE_PS - HONDA_DIAGH_PS - UBP_PS (UBP - Ford UART Based Protocol)
Specification - Supported mode
- USB-Serial (4/5:GND, 6:CTS, 7:RXD, 8:DTR/DSR, 14:RTS, 15:TXD)
- USB-Serial Inverted (4/5:GND, 6:~CTS, 7:~RXD, 8:~DTR/~DSR, 14:~RTS, 15:~TXD)
- K-Line + USB-Serial LPG/CNG (4/5:GND, 12:RX/L, 13:TX/K, 7:K) !!! 2 Virtual COM-Ports !!!
- KL-Line (7:K, 15:L)
- 2K-Line (7:K, 15:K2)
- KKL-Line (7:K, 15:L/K2)
- 3K-Line (7:K, 15:K2, 8:K3)
- OPEL 4K-Line (7:K, 8:K3, 3:K4, 12:K5)
- Multiplexed K-Line to ALL OBD-pins